New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
How Much Does Patio Door Installation Cost in Los Angeles?
Patio door installation in Los Angeles typically costs between $1,800 and $5,200 for a standard sliding glass door, with most homeowners paying around $2,900 to $3,600 including the door, labor, and basic frame work. French patio doors run higher, usually $2,500 to $6,500 installed, while premium impact-rated doors like PGT or CGI can push the total past $8,000 in coastal or hillside zones. These numbers reflect the LA market specifically, where permit requirements, older home retrofits, and seismic anchoring add costs you would not see in other parts of the country.
Before you read further, know this: every price you see here is a reference range based on jobs we have quoted across Los Angeles since 2009. Your written price comes before any work starts, and it does not change at the door. That is how Westlight Windows & Doors has always operated, and it is the first promise in the Kingswell Guarantee.
Key Takeaways
- Standard sliding patio door installation: $1,800 – $5,200 installed
- French patio doors: $2,500 – $6,500 installed
- Impact-rated patio doors (PGT, CGI, CWS): $4,000 – $9,000+ installed
- Labor alone runs $500 – $1,500, depending on framing and finish work
- Permits in LA add $150 – $500, and many older homes require retrofits that increase the total
- Free written estimates: call (213) 810-3461
Patio Door Installation Cost Breakdown (2026)
Here is the short version: a quality patio door, properly installed, costs more than the door itself. The door is maybe half the bill. The other half is labor, framing, flashing, stucco repair, and the small hardware that determines whether the door actually slides smoothly in five years.
| Line Item | Typical Range in Los Angeles | Notes |
|---|---|---|
| Sliding patio door (vinyl) | $600 – $1,800 | Standard 60″ or 72″ door, basic glass |
| Sliding patio door (aluminum or fiberglass) | $1,200 – $3,500 | Stronger frame, better thermal performance |
| French patio door (2-panel) | $1,500 – $4,000 | Swing-out or swing-in; hardware matters at this price |
| Impact-rated patio door (PGT, CGI, CWS) | $2,500 – $6,000+ | Required in some hillside and coastal areas |
| Labor and installation | $500 – $1,500 | Includes removal, framing, flashing, finish trim |
| Permits | $150 – $500 | LA Department of Building and Safety fees |
| Stucco or drywall repair | $200 – $800 | Common on older homes when opening is resized |
| Old door haul-away | $50 – $150 | Often included; confirm on your written quote |
Those are the honest line items. Some companies quote a low door price and then surprise you with labor, disposal, and “unexpected” framing charges on the final invoice. We write the full price down before the work starts, because the Kingswell Guarantee requires it: a written price before any work begins, a committed arrival window, a clean job site, and a written guarantee on the completed work.
What Drives the Price Up
If your home was built before 1980, plan for the installer to find something behind the old door. In neighborhoods like Echo Park, Silver Lake, and the older parts of Pasadena, we regularly open up patio door frames and find dry rot around the threshold, no flashing, or headers that were not sized correctly in the first place. Fixing that correctly adds $300 to $1,000, but skipping it means the new door leaks within two winters. We will not skip it, and our written quote will tell you upfront if we suspect it.
Hillside properties have a different cost driver: wind exposure and seismic anchoring. If your home sits up in Mount Washington, Baldwin Hills, or the Hollywood Hills, your patio door likely needs impact-rated glass and stronger tie-downs. That is a safety requirement as much as a building code matter, and it is the biggest reason one house in Los Angeles pays $2,800 for a patio door while a house three miles away pays $6,500.
What Can Bring the Price Down
If the existing opening is standard size, in good shape, and has no water damage, installation is straightforward and labor stays on the low end. A door that fits the existing rough opening without resizing saves the framing repair line entirely. Also, choosing a vinyl sliding door from a line like ECO Window Systems delivers solid thermal performance without the aluminum or impact-rated markup. We carry eight manufacturer lines, including PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux, because the right product should match the job. Not every home in Los Angeles needs impact-rated glass. Some do, and we will tell you if yours does. But if it doesn’t, we will not sell it to you.
What Affects Patio Door Installation Pricing in Los Angeles
Los Angeles is not a single market. A patio door in Northridge costs something different from the same door in San Pedro, and the reasons are concrete, not mysterious. Here are the factors we see every week:
- Age of the home and condition of the opening. Homes built before 1980 in neighborhoods like West Adams, Leimert Park, and Highland Park often have wood frames that have been soaking up moisture for 40 years. The door might be fine; the frame is not. Expect framing repair to enter your quote.
- Seismic and impact requirements. LA building code requires seismic anchoring for large glass openings, and certain hillside and coastal zones require impact-rated products. If your property falls in a designated wind-borne debris region, your door choices narrow to brands like PGT and CGI, which are built for exactly that. The cost is higher because the engineering is real, not because someone is upselling you.
- Door size and configuration. A standard 72-by-80-inch opening is the cheapest to fit. Wider openings, three-panel sliding configurations, or a patio door with side fixed panels move pricing up quickly. Custom sizing means custom lead times and custom fabrication costs.
- Stucco work. Most Los Angeles homes are stucco, and cutting back stucco to install flashing, then patching it cleanly, is skilled work. It adds labor hours and affects the finish. A good installer makes it invisible; a careless one leaves a scar around the new door.
- Permit status. Some smaller door swaps can be done without a permit, but any new opening or structural change legally requires one through the LA Department of Building and Safety. Permits add cost, but they also create a record that your door was installed to code, which matters for insurance and resale.
- Hardware quality. A $25 sliding door roller set fails in two years. A $150 stainless roller and track system lasts twenty. We specify hardware by brand and model on every quote because it is one of the quietest ways a contractor can either honor the job or cut the job.
Labor Costs in Los Angeles: What You Are Really Paying For
Labor for patio door installation in LA runs $500 to $1,500 for a standard swap, and more when the job includes framing, stucco, or structural retrofits. That number reflects more than time on site. You are paying for a technician who is background-checked and uniformed, who arrives in the window we gave, and who has installed enough patio doors in Los Angeles to know what a water-damaged header looks like before it becomes your problem.
Our founder, Owen Satterfield, set this operation up in 2009 with a simple rule: every customer gets a written price before any work starts. Owen had seen too many homeowners handed one number on the phone and another at the door, and he built Westlight Windows & Doors to be the company that does not do that. The Kingswell Guarantee is his answer to the industry’s worst habit: no revised invoices, no door-step surprises, and a written guarantee on every single job.
When you hire Westlight, you are not hiring a rotating cast of subcontractors. You are hiring technicians who work under the Westlight name, wear the uniform, and are accountable to the same promise Owen put in writing in 2009. That accountability is part of the labor line on your quote, and it is the part you cannot comparison-shop by price alone.
Patio Door Options and What They Cost in Los Angeles
Sliding Patio Doors: $1,800 – $5,200 Installed
The sliding patio door is the most common replacement in Los Angeles, and for good reason: it maximizes glass area without swinging into usable space. Vinyl sliders from ECO Window Systems start on the low end of the range. Aluminum and fiberglass frames from CWS or Mr-Glass push higher, with stronger thermal breaks and tighter tolerances. If your current slider sticks, has fogged glass, or lets a draft through on cool evenings in the Valley, replacement is usually more cost-effective than repair once the frame itself has warped.
French Patio Doors: $2,500 – $6,500 Installed
French doors swing rather than slide, and that mechanical difference drives both price and user experience. The hinges, the threshold, the alignment between two active panels: every component has to be installed with more care. Therma-Tru is our primary entry and French door line, known for consistent milling and sound construction. In neighborhoods with smaller lots and tight living rooms, like Koreatown or Westchester, homeowners often choose in-swing French doors to avoid having the door swing into an exterior space they cannot spare.
Impact-Rated Patio Doors: $4,000 – $9,000+ Installed
Impact-rated patio doors from PGT and CGI are built to withstand hurricane-force windborne debris. Why does that matter in Los Angeles? Because parts of the city sit in wind-borne debris regions due to their elevation and exposure, and because modern building science has found that impact-rated glass does double duty: it holds its structure through seismic events better than standard annealed glass. If you live in the Hollywood Hills, Encino hillsides, or parts of Rancho Palos Verdes, this may be the right product, and the extra cost buys real structural integrity, not just a label.
ViewLux Patio Doors: $2,000 – $5,800 Installed
ViewLux is a newer line in our stable, aimed at homeowners who want modern, narrow-frame sightlines without stepping into floor-to-ceiling custom territory. It is a strong middle option for mid-century homes in neighborhoods like Los Feliz or Mar Vista, where the architecture wants a lot of glass but the budget does not want architectural-custom pricing.
How to Save on Patio Door Installation
Saving money on a patio door does not mean finding the cheapest bid. In this trade, the cheapest bid is often the most expensive door you will ever buy, because you will buy it twice. The real savings come from smart scope decisions:
- Replace in the same opening. If your existing patio door is a standard 72-by-80 inch opening and the frame is sound, choose a door that fits it exactly. Resizing an opening is one of the fastest ways to add $500 to $1,000 in framing and stucco costs.
- Do not over-buy for your location. Impact-rated products are genuinely necessary in some parts of Los Angeles and genuinely unnecessary in others. We will tell you which one you live in, and we will quote accordingly. Eight manufacturer lines exist so we are not forcing one brand onto every job.
- Handle repair issues when they are small. If your patio door currently sticks or drafts but the glass is intact and the frame is square, ask about hardware replacement before full replacement. Some doors can be brought back to smooth operation for a few hundred dollars. When water damage or frame rot is present, however, the math flips: replace now before the repair scope doubles.
- Get a real written quote, not a phone estimate. A written quote forces the contractor to stand behind their number. It is also the first promise in the Kingswell Guarantee. We give every homeowner a written price before any work starts, and we invite you to hold us to it. Call (213) 810-3461 to schedule your free estimate.
FAQs – Patio Door Installation Cost
How much does it cost to install a patio door in Los Angeles?
A standard sliding patio door installation in Los Angeles runs $1,800 to $5,200, with most homes landing between $2,900 and $3,600. French doors run higher, impact-rated doors higher still. Your written quote from Westlight lists every line item before work begins, so there are no surprises at the door. Call (213) 810-3461 for a free estimate.
Is it cheaper to repair or replace a patio door in Los Angeles?
If the issue is worn rollers, a damaged handle, or a drafty weatherstrip, repair usually costs $150 to $600 and is the smarter call. If the glass has failed, the frame is warped, or water has gotten into the wood underneath, replacement at $1,800 to $5,200 is the financially honest choice, because a repair will not address the underlying damage. We assess this honestly on every free estimate.
How much does a sliding glass patio door itself cost without installation?
A basic vinyl sliding patio door without labor costs $600 to $1,800 at Los Angeles supplier prices. Aluminum and fiberglass models run $1,200 to $3,500, and impact-rated doors from PGT or CGI start around $2,500. Keep in mind that buying a door without professional installation means you own the liability for flashing, leveling, and code compliance.
Do you need a permit to install a patio door in Los Angeles?
If the new patio door fits the same rough opening and no structural changes are made, a permit is often not required. If the opening is being enlarged, moved, or structurally altered, a permit through the LA Department of Building and Safety is legally required and typically costs $150 to $500. On every Westlight job, we tell you upfront whether your project requires a permit and handle the paperwork if it does.
Can you install a patio door the same day in Los Angeles?
For a standard replacement in a sound opening, yes, installation is often completed in a single day. Jobs that involve framing repair, stucco work, or impact-rated custom sizing take longer. When you call Westlight for an estimate, we give you a real arrival window and a realistic completion timeline, both in writing, before any work begins.
What is the most cost-effective patio door brand for Los Angeles homes?
For most Los Angeles homes, ECO Window Systems offers the strongest balance of thermal performance and installed price, typically landing in the $1,800 to $3,200 range. For homes requiring impact-rated products, PGT and CGI are the right options even though they cost more, because they meet code and protect the opening. We stock eight manufacturer lines so the product matches the home, not the other way around.
The Westlight Difference on Patio Door Installation
There are hundreds of companies in Los Angeles that will sell you a patio door. Many of them will quote you a number on the phone, then present a different number after the old door is already out of the wall. We think the contract matters more than the sale, which is why our home page and every quote we write lead with the Kingswell Guarantee: a written price before any work starts, a committed arrival window, a clean job site, and a written guarantee on the completed work.
Our Patio Door Installation in Los Angeles service exists because homeowners deserve one straightforward experience: you call, a real person answers, we give you a written price, we show up in the window we gave, we install a quality patio door that fits your home and your neighborhood, and if the work is not right within the 365-day guarantee period, we come back and fix it at no charge. That is the 365-Day Done Right Promise, and it is written on the guarantee card we hand you when the job is done.
Need a patio door price for your specific home? Call (213) 810-3461. A live person answers, 24 hours a day, 7 days a week. We will schedule your free estimate, measure the opening, and hand you a written price before a single screw turns. That is how it should work.
Pricing reflects the Los Angeles market as of 2026. Westlight Windows Los Angeles offers free estimates – call (213) 810-3461.
Written by Owen Satterfield, Owner at Westlight Windows & Doors, serving Los Angeles since 2009.
Six Reasons Homeowners Choose Westlight Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Westlight Windows Los Angeles Services
What Neighbors Say About Westlight Windows Los Angeles
What Our Customers Say
"Our energy bill in summer was brutal. New windows made a real dent in it. Salesman wasn't pushy and didn't do the fake "today only" discount thing the others tried."
- Bethany Oh"Front door was swollen and wouldn't latch half the year. New door and frame, done in a day. Looks great and actually seals. Written price didn't budge."
- Renee Saldana"Replaced a big picture window that had a failed seal and was always foggy. Can finally see the yard again. On time, tidy, and they stood behind the install with a written guarantee."
- Carol Whitaker