New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Windows & Doors in West Hollywood, CA | Westlight Windows Los Angeles
We provide independent PGT service across West Hollywood, from our Window Installation in West Hollywood to full-frame replacements on courtyard apartments and mid-century condos. The thing that makes our PGT work different here is that we know the old stucco, the tight lot lines, and the rent-control rules that govern what you can and can’t do. We’re not a manufacturer affiliate, and we don’t push replacement when a repair will outlast the building’s next tenant turnover. Call (213) 810-3461 for a free estimate, and we’ll tell you straight what your PGT windows or doors actually need.
If you’re looking for PGT sales & service from a crew that knows the brand cold, you’ve found the right page.
Why West Hollywood Residents Choose Us for PGT Service
We’ve been installing and servicing PGT product families since we opened in 2009, and we’ve seen how they age in West Hollywood specifically. The bright sun off Santa Monica Boulevard fades vinyl glazing beads faster than most people expect. The fine grit that blows through the canyons in October works its way into rollers and tracks. None of this surprises us anymore, and that’s the point. Owen Satterfield, our owner, learned the trade through the construction technology program at Los Angeles Trade-Technical College, and he’s spent the two decades since measuring, framing, and hanging windows and doors across the Los Angeles basin. He grew up in Palms, close enough to the 405 that he still jokes he can tune his sleep to freeway noise, so West Hollywood’s particular brand of density doesn’t faze him.
We carry parts and hardware specific to PGT WinGuard and 2200/7700 lines, and we know when an OEM part matters and when an aftermarket part does the job better. We show up in the window we gave, leave the site cleaner than we found it, and put every guarantee in writing.
Common PGT Windows & Doors Problems We Solve in West Hollywood
Every building ages differently, but certain PGT failure modes show up over and over in West Hollywood’s housing stock. Here’s what we see most:
- Seized or stiff rollers on PGT 7700 sliding glass doors. Fine dust and Santa Ana grit work their way into the roller assemblies, especially in hillside units near the Sunset Strip. The door still slides, but it takes two hands and a hip check. We replace the rollers, clean the track bed, and adjust the strike plates so the door closes flush again.
- Faded or brittle vinyl glazing beads on PGT 2200 single hungs. South-facing elevations in mid-century condos take direct sun for most of the day, and the vinyl beads that hold the glass in place eventually crack. When those fail, the sash loses its weather seal and starts rattling. We replace the beads and re-seat the glass before it shifts.
- Loss of interlock seal on PGT WinGuard impact sliders. In high-density courtyard buildings, tenants complain about street noise even when the glass looks perfect. The problem is usually the interlock gasket between the meeting rails. Compressed gaskets let drafts and sound through. We replace them with OEM interlock strips sized for the specific WinGuard frame.
- Corrosion at weep holes and frame corners on aluminum WinGuard windows. Older Spanish Colonial buildings with minimal overhangs let rainwater pool at the sill. Over decades, the weep holes clog and the frame corners start to oxidize. We clean the channels, treat the corrosion, and restore drainage so water doesn’t back up into the wall.
- Hard-to-operate horizontal rollers on sliding impact windows. Same story as the 7700 doors, but on smaller sashes. The rollers bind, the frame flexes, and the lock stops engaging properly. We rebuild the roller assembly and get the sash moving like it should.
PGT Service in West Hollywood: What Local Conditions Mean for Your Equipment
West Hollywood’s dense, pedestrian-oriented neighborhoods create a repair environment you won’t find in most of the basin. Many courtyard apartments on streets like Harper and Kings Road have narrow side yards and zero lot-line setbacks, so our PGT repair teams routinely work through rowhouse entries and interior corridors, not curb-side staging. That changes how we move tools, how we protect floors, and how we plan each visit. It also means we have to protect original stucco when removing seized steel and early aluminum frames, because patching blown-out stucco on a rent-controlled courtyard building is a headache no landlord wants. On Kings Road, a landlord asked us to quiet two original PGT WinGuard sliders in a 1950s courtyard unit where tenants complained of Sunset Strip traffic noise. Our tech found the interlock gaskets compressed and the rollers frozen from decades of fine grit. We cleaned the tracks, replaced the rollers with aftermarket stainless sets and the gaskets with OEM interlock strips, then adjusted the strike plates, cutting the decibel creep by more than half without touching the stucco.
That’s the kind of job that doesn’t show up in a brand brochure, but it’s the work West Hollywood actually needs.
PGT Models & Products We Service in West Hollywood
Our crew works on PGT Vinyl, Aluminum, and WinGuard impact product families every week across West Hollywood, from restoring corroded original aluminum frames in courtyard apartments to replacing failed balances on mid-century WinGuard sliders. We service the PGT WinGuard Aluminum Impact and WinGuard Vinyl Impact lines, the PGT 2200 Vinyl Single Hung, and the PGT 7700 Aluminum Sliding Glass Door, along with horizontal roller and sliding impact windows. We source OEM PGT parts where they materially affect performance: locks, balances, and WinGuard interlock gaskets. When OEM is backordered or cost-prohibitive, we use proven aftermarket rollers and weatherstripping, and we’ll always prefer restoring a salvageable original frame over replacement unless the glass or extrusion is compromised.
We also handle our Window Replacement in West Hollywood and window maintenance and care for PGT products, so if a repair isn’t the right call, we’ll tell you that too.
PGT Service Pricing in West Hollywood
Most PGT service calls in West Hollywood run between $145 and $380 for a straightforward repair: a roller swap, a gasket replacement, a balance rebuild. Full-frame replacements on a PGT 2200 or WinGuard window typically run $720 to $1,700 per opening installed, depending on frame condition, access, and whether the opening needs re-flashing. Sliding glass door roller replacements on a 7700 run $220 to $460 per door. What drives cost here is access more than parts: working through a narrow courtyard corridor adds labor time, and that’s honest math we show you before any work starts. Every estimate is written, line-item, and handed to you before a single screw turns. Call (213) 810-3461 for an exact quote, and we’ll send a tech out to look at your building in person.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – PGT Windows & Doors in West Hollywood
Yes, and we do it regularly on streets like Harper and Kings Road. We work from the interior whenever possible, use hand tools and controlled heat to break seized fasteners, and protect the surrounding stucco with padded shims before we apply any prying force. No stucco damage means no stucco patch, which keeps your historic facade intact and your landlord’s stress low.
The glass is rarely the problem. In West Hollywood’s courtyard buildings, the culprit is almost always a compressed interlock gasket or frozen rollers. The gasket between the meeting rails loses its spring after years of sun and temperature cycles, and the gap lets sound travel through. We replace the interlock gasket with an OEM strip and rebuild the rollers, and the rattle usually disappears the same day. Call (213) 810-3461 if you want a tech to confirm what yours needs.
No. West Hollywood’s mild Mediterranean climate and lack of hurricane exposure mean impact glazing is not a code requirement for most buildings. That said, WinGuard impact windows do reduce street noise and add security, which is why many condo boards in high-traffic corridors near Santa Monica Boulevard still spec them. Check with your HOA before you assume either way.
Yes. West Hollywood’s rent control ordinances and historic district rules mean we can’t just swap a window for whatever fits. We match frame profiles, mullion patterns, and sightlines to the original design, and we coordinate with property managers on access and scheduling. The goal is a window that works like new without altering what the building looks like from the street.
You can usually replace just the rollers and weatherstripping, and that’s what we recommend unless the frame is corroded through or the glass is compromised. A roller and weatherstripping replacement on a 7700 typically runs $220 to $460, which is a fraction of a replacement door. We’ll always quote the repair first, and we’ll only suggest replacement if the frame genuinely can’t be salvaged. Call (213) 810-3461 for a written estimate before you decide.
Service Areas Near West Hollywood
We serve the neighborhoods and cities around West Hollywood, including West Hollywood service area itself, along with PGT service in Los Angeles and PGT service in East Los Angeles. Our crews also cover North Hollywood, Santa Monica, and Manhattan Beach for PGT window and door work.
Book Your PGT Service in West Hollywood Today
If your PGT windows or doors need attention in West Hollywood, call (213) 810-3461 and we’ll schedule a free estimate. Owen and the crew answer the phone, set a real arrival window, and hand you a written price before any work starts. We’ll tell you what can be repaired, what should be replaced, and what it’ll cost, in plain words.
Written by Owen Satterfield, Owner at Westlight Windows Los Angeles, serving West Hollywood since 2009. A window should work as hard as the house it’s in.
Six Reasons Homeowners Choose Westlight Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.