New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Mr-Glass Impact Garage Doors: The Los Angeles Owner’s Guide
If you have a Mr-Glass impact garage door with a failing part, we stock and install the replacement components here in Los Angeles. Most Mr-Glass impact door repairs in LA run between $240 and $780 installed depending on the part, and we can usually match the correct component to your door in a single visit. The way most homeowners find out something’s wrong is hard to miss: a grinding noise when the door moves, a sag on one side, or the door hesitating halfway up. You’ll notice it before it fails completely, and that’s the time to call.
- Quick answer: Most Mr-Glass impact door part replacements in Los Angeles run $240 – $780 installed, depending on the component.
- What to check first: Look for the model label on the inside edge of the door panel or on the track bracket.
- Safety note: Torsion springs and lift cables on an impact door carry hundreds of pounds of tension. Do not attempt those repairs yourself.
Which Mr-Glass Models This Applies To
Mr-Glass impact garage doors are built for coastal and high-wind zones, and they share hardware patterns across their residential line, but there’s a compatibility gotcha: the hinge and roller assemblies on Mr-Glass impact doors use a thicker gauge bracket than standard non-impact doors, and you cannot swap in a generic box-store hinge without it binding on the track. The roller stems are also shorter, which matters if you’re trying to match an aftermarket roller. If your label has worn off, measure the roller stem length, not the wheel diameter. That measurement tells us which series you have.
For Mr-Glass doors specifically, we recommend OEM components for anything in the load path (hinges, brackets, track bolts, struts) because the impact rating depends on calibrated hardware. Aftermarket equivalents are fine for cosmetic trim, weatherstripping, and non-structural components. We keep both on our trucks because not every repair justifies OEM pricing, and the right call is the one that costs you less over the life of the door.
Signs Your Mr-Glass Impact Garage Door Is Failing
- A grinding or squealing noise when the door moves: The roller bearings are wearing out, and on an impact-rated door, the added panel weight accelerates this. In Los Angeles, coastal humidity and salt air can take rollers out in 5 to 8 years instead of the usual 10 to 12.
- The door sags to one side or sits uneven in the frame: One of the lift cables is stretching or a hinge bracket is loosening, which puts diagonal stress on the tracks. Left alone, it will eventually pull the track out of alignment and jam the door.
- The door hesitates or reverses midway up: The spring tension is losing its balance, or a sensor is misaligned. Impact doors are heavier than standard panels, so the springs do more work and fail sooner than you’d expect.
- Visible rust or corrosion at the bottom panel seam: Mr-Glass doors use galvanized steel, but in Los Angeles neighborhoods closer to the coast, the bottom panel takes salt air and road spray. Once the galvanization is compromised at the seam, the panel loses structural integrity.
- The weatherstripping along the bottom edge is cracked or coming loose: This is the earliest and most common failure. It lets water, debris, and pests in, and on an impact-rated door, degraded weatherstripping reduces the seal you bought the door for.
Replacement Cost & What’s Included
Here’s what we typically see in Los Angeles for Mr-Glass impact door parts, including labor:
| Part | Typical Installed Range |
|---|---|
| Weatherstripping and seal replacement | $140 – $260 |
| Hinge and roller replacement (set) | $220 – $420 |
| Lift cable replacement (pair) | $180 – $350 |
| Spring replacement (torsion, pair) | $380 – $780 |
| Panel bottom section replacement | $450 – $900 |
The range depends on which Mr-Glass series you have, whether we’re replacing one part or a set, and how much labor the access requires. Every estimate starts with a written price before any work begins, so you’ll know the number before we touch a single bolt. If we install a part and it fails within the guarantee period, we come back and correct it at no charge. That’s the Kingswell Guarantee, in writing, on every job.
DIY or Call Us?
Here’s the honest split. You can safely replace the bottom weatherstripping yourself if you have a utility knife and the right profile, and you can visually check your rollers, brackets, and cables for wear without touching anything under tension. Cleaning the tracks and lubricating the rollers with a silicone spray is also fine to do yourself.
What you should not do yourself is touch the torsion springs, lift cables, or any bracket that connects to a cable. Impact doors carry more panel weight than standard doors, and when a spring or cable lets go, it releases that tension instantly. That’s a job for someone who does this every week. If you’re in Los Angeles and you’re not sure which category your issue falls into, call us at (213) 810-3461 and describe what you’re seeing. We’ll tell you over the phone whether it’s something you can handle or something we should put on the truck.
FAQs
Springs typically last 7 to 10 years in LA, rollers 5 to 10 years depending on distance from the coast, and weatherstripping 3 to 5 years before the sun and heat dry it out and crack it. Impact-rated doors carry more weight, which shortens spring and roller life compared to a standard door in the same neighborhood. Call (213) 810-3461 if you’re seeing early wear patterns and we’ll tell you what’s normal for your area.
It depends on the part. Weatherstripping is always replaced, never repaired. Rollers can sometimes be cleaned and re-lubricated if caught early, but by the time they’re grinding, the bearing is usually done. Hinges and brackets can be tightened and sometimes reused if the metal isn’t deformed. Your best move is a quick visual check with us over the phone: describe the symptom and we’ll tell you what’s likely before we schedule anything.
Most single-part replacements on Mr-Glass doors take 60 to 90 minutes once we’re on site. A full spring pair and cable replacement runs closer to two hours. We show up with the common Mr-Glass-specific hardware already on the truck, so we don’t have to leave and come back, and you’ll have a real arrival window before we schedule the visit.
We stock the most common Mr-Glass impact door components on our trucks: hinges, rollers, cables, brackets, weatherstripping, and springs in the sizes that cover the majority of LA installations. Less common parts, like full replacement panels or specific trim pieces, are ordered direct and usually arrive within a week. We’ll tell you upfront whether your part is on the truck or needs a lead time, so you’re never surprised.
If your Mr-Glass impact garage door is making noise, sagging, or just not moving the way it should, call Westlight Windows Los Angeles at (213) 810-3461. We’ll talk through what’s happening, give you a straight answer on cost, and show up when we say we will. Westlight Windows Los Angeles is an independently owned and operated Kingswell location, and we are not affiliated with Mr-Glass, but we work on their doors every week. A window should work as hard as the house it’s in, and a garage door should do the same. Call today for your free estimate.
Written by Owen Satterfield, Owner, Westlight Windows Los Angeles at Westlight Windows Los Angeles, serving Los Angeles and nearby areas.
Six Reasons Homeowners Choose Westlight Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.