New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Horizontal Roller Windows in Los Angeles, CA
Horizontal roller windows slide side to side along a track instead of cranking outward or tilting in. They’re a common sight in mid-century and ranch-style homes across Los Angeles, from the San Fernando Valley down to South Bay, and they remain one of the most practical choices for wide openings over a kitchen sink, a patio counter, or anywhere a swinging sash would get in the way. At Westlight Windows Los Angeles, we install and replace horizontal roller windows as part of our broader Window Installation in Los Angeles work, and we do it with a written price before any work starts, a real arrival window, and a guarantee in writing when we leave. If you’ve got a roller window that’s sticking, fogging, or letting in a draft, call us at (213) 810-3461 and we’ll talk through what’s actually going on.
The name Westlight comes from the late-afternoon sun that pours through a good window: bright, warm, and worth doing right. That’s the standard we hold window installation work to, and it’s why Owen Satterfield has kept this company focused on plain answers and clean installs since 2009.
When You Need Horizontal Roller Windows
Most Los Angeles homeowners don’t wake up thinking about window tracks. They notice a symptom first. Here’s what typically sends people to the phone:
- The window fights back. If you have to lean your body weight into the sash to get it moving, the rollers are worn or the track is bent. In older LA neighborhoods like Westchester or Mar Vista, salt air and decades of use do a number on aluminum tracks.
- The window won’t stay in place. A horizontal roller window that drifts open on its own, or slams shut when someone walks by, has failing rollers or a track out of level. That’s both a security risk and an air leak.
- Fog between the panes. Double-pane roller windows that look permanently hazy have lost their seal. Here in Los Angeles, the temperature swings between hot days and cool nights put real stress on seals over time, and a failed seal means the insulating gas is gone and the glass can’t do its job.
- Drafts and heat gain. You feel warm air leaking in around the edges in summer, or you notice the room heats up by noon even with the AC running. Old or builder-grade roller windows are often the weak point in an LA home’s envelope.
- Outdated single-pane glass. Plenty of homes built before the 1980s in neighborhoods like Eagle Rock, Highland Park, and Inglewood still have original single-pane aluminum sliders. They lose cool air in summer and let in street noise year-round.
- A wide opening that a casement or double-hung can’t fill well. Horizontal roller windows work well in broad, low openings. If you’re replacing one and want something that actually fits the opening you have, a roller window is often the right call.
If any of that sounds familiar, the next step is a conversation, not a sales pitch. Call (213) 810-3461 and tell us what the window is doing. We’ll tell you whether replacement makes sense or whether a repair is the smarter short-term move.
Our Horizontal Roller Windows Process
We follow the same five steps on every roller window job, whether it’s a single replacement in Silver Lake or a whole-house swap in Sherman Oaks. The Kingswell Way means saying the price before the work, showing up in the window we gave, leaving the place cleaner than we found it, putting the guarantee in writing, and coming back if it fails. Here’s what that looks like in practice:
- You call and a person answers. Not a voicemail tree, not a chatbot. A real, live person at (213) 810-3461 takes your call 24 hours a day, 7 days a week, asks what’s going on, and schedules a time that works.
- We measure and talk options. A background-checked, uniformed technician comes to your home, measures the opening, checks the track condition, and walks you through products that make sense. We carry eight manufacturer lines, including roller window options from ViewLux, PGT, CGI, and CWS, so we aren’t forcing one brand into every situation.
- You get a written price before any work starts. No door-step surprises, no revised invoices. The number you see is the number you pay. If the job needs a custom size or an impact-rated unit, that’s reflected in the written price up front.
- We install on the day we said we would. You get a committed arrival window and we honor it. We remove the old sash and track, install the new unit, insulate and seal around the frame, and test the slide until it moves the way it should.
- We clean up and hand you a written guarantee. The job site is left cleaner than we found it, and you receive the guarantee in writing. Under our 365-Day Done Right Promise, if anything about the work isn’t right within the guarantee period, we come back and fix it at no charge. That’s automatic, not something you have to negotiate for.
Horizontal Roller Windows Pricing in Los Angeles
Horizontal roller window replacement in Los Angeles typically runs $450 to $1,100 per window installed for standard aluminum or vinyl units in average-sized openings. Impact-rated models, larger custom sizes, and labor in harder-to-access areas push toward the top of that range, and occasionally beyond it. You’re better off knowing the range than getting a vague “it depends” and a surprise later, which is exactly why we put prices in writing before any work begins.
Here’s a breakdown of what drives the cost on a typical roller window job in LA:
- Glass package. Single-pane is the cheapest but does almost nothing for energy efficiency. Double-pane with low-e glass (a thin coating that reflects heat back into the room in winter and out in summer) adds cost, but it’s the option most LA homeowners choose, especially for west-facing windows that take the full force of the afternoon sun.
- Frame material. Standard aluminum is the most common and most affordable. Vinyl frames cost a bit more but insulate better. Aluminum frames in coastal neighborhoods like Playa del Rey or San Pedro need factory finishes that hold up to salt air, which adds a modest premium.
- Impact rating. In certain Los Angeles areas and for homeowners who want storm protection, impact-rated roller windows from PGT or CGI are the right call. They cost more, but they carry a specific benefit that standard units don’t.
- Opening size and accessibility. A standard 60-inch-wide slider is straightforward. A 96-inch custom unit or a second-story opening with tricky access adds labor and sometimes a custom frame cost.
- Removal and disposal. We include removing the old window and hauling it away in the written price. You won’t get a separate disposal line item after the fact.
Most single roller window replacements fall between $500 and $800 installed with a standard double-pane, low-e package in a normal-sized opening. Larger sliders, impact glass, and wood-look interior finishes raise that. The only way to know your number is for us to measure and quote it, and the quote is free. Call (213) 810-3461 and we’ll get you a written price with no obligation.
Manufacturer Lines We Install for Roller Windows
We don’t stock one brand and force every homeowner toward it. We carry eight manufacturer lines, and for horizontal roller windows specifically, we lean on a few that do the job well:
- ViewLux makes a clean, modern roller window line that fits well in contemporary Los Angeles homes and mid-century remodels. Their horizontal sliders move smoothly on ball-bearing rollers and come in narrow frame profiles that let in more glass.
- PGT is the name homeowners in storm-prone areas look for. Their impact-rated roller windows are tested for wind-borne debris and, when installed correctly, meet the requirements that some LA county building codes reference for specific zones.
- CGI also builds impact-rated horizontal sliders that hold up to serious weather. If you’re in a hillside area or an exposure where wind loads run high, CGI is one of the lines we’d talk through.
- CWS offers a strong value option in vinyl and aluminum, with a smooth slide and straightforward warranty terms. It’s a solid choice for standard replacements where the goal is a tight, efficient window without paying for bells and whistles.
We’ll talk through the tradeoffs honestly so you can match the right product to the job, not the other way around.
Frequently Asked Questions About Horizontal Roller Windows in Los Angeles
How much does it cost to replace a horizontal roller window in Los Angeles?
Most horizontal roller window replacements in Los Angeles run $450 to $1,100 per window installed, with typical double-pane, low-e units in standard openings landing around $500 to $800. Impact-rated glass, custom sizes, and second-story work push the price toward the top of the range. Every quote we give is in writing before any work starts, so the price you see is the price you pay. Call (213) 810-3461 for a free, exact quote on your specific opening.
Can you install a horizontal roller window the same week I call?
In most cases, yes, we can schedule an installation within a week of your written quote, and we often accommodate faster timelines when you need it. Product availability varies by manufacturer line and glass package, and custom sizes can add a few days. We’ll give you a committed arrival window when you book, and we’ll actually show up in it. Call (213) 810-3461 and we’ll tell you the soonest real date.
Can you fix a horizontal roller window that’s hard to slide, or do I have to replace it?
Some sticking or drifting roller windows can be fixed by replacing worn rollers, cleaning and realigning the track, or replacing a failed seal, and we’ll tell you honestly if a repair makes sense. If the frame is corroded, the glass has failed, or the unit is old enough that the cost of repair is more than half the cost of replacement, we’ll say that too. We don’t push replacement when a repair is the fairer call, and we don’t patch something that’s going to fail again in a year. Call (213) 810-3461 to have it looked at.
Do you install impact-rated horizontal roller windows?
Yes, we install impact-rated horizontal roller windows from PGT and CGI, and we’ll recommend them when the location or your own preference makes sense. Impact-rated units use laminated glass and stronger frames tested to withstand wind-borne debris, and they add cost over standard units. If you’re unsure whether you need the rating in your specific Los Angeles neighborhood, talk it through with us: we’ll give you the straight answer rather than upselling a feature you don’t need. Call (213) 810-3461 with questions.
Is it better to repair or replace an old roller window in an LA home?
It depends on the age of the unit and what’s failing. If the rollers are worn and the glass and frame are still in good shape, a roller and track service can restore smooth operation for a modest cost. If the seal has failed, the glass is single-pane from the 1970s, or the frame is corroded from years of coastal air, replacement is usually the better long-term value, especially given LA’s heat and energy costs. We’ll give you a straight recommendation based on the actual window in your wall, not a generic guideline, and the inspection is free. Call (213) 810-3461 to schedule it.
Neighborhoods We Serve
We install horizontal roller windows across Los Angeles County, and we know the neighborhoods well enough to anticipate the conditions each one throws at a window:
- Westside and coastal areas including Santa Monica, Venice, Marina del Rey, Playa del Rey, Westchester, and El Segundo: salt air accelerates aluminum corrosion, so roller window tracks and frames in these ZIP codes need factory finishes and hardware built to resist pitting. We see it constantly on older sliding windows.
- South Bay including Torrance, Redondo Beach, Hermosa Beach, and Manhattan Beach: ocean exposure plus significant daily temperature swings means seal failures and worn tracks show up earlier than in inland homes.
- Westside and central LA including Culver City, Palms, Mar Vista, and Mid-City: miles of post-war homes with original horizontal slider windows, many of them single-pane and long past their useful life.
- Valley communities including Sherman Oaks, Studio City, Encino, Reseda, Northridge, and Woodland Hills: summer heat is the main adversary. Low-e glass and insulated frames make a measurable difference in cooling bills here.
- Northeast LA and the foothills including Eagle Rock, Highland Park, Glassell Park, and Pasadena: many mid-century homes with wide horizontal openings where roller windows are still the most sensible replacement option.
- Central and southeast LA including Inglewood, Compton, Downey, and South Gate: older window inventory, much of it single-pane aluminum with failed or failing hardware.
If your neighborhood isn’t listed, call anyway. We cover the full Los Angeles metro.
Why Los Angeles Homeowners Choose Westlight for Roller Windows
Owen Satterfield started this company in 2009 because he’d seen too many window contractors cut corners and then disappear. Westlight operates as an independently owned and operated Kingswell location, and the way we run a roller window job reflects that from the first call to the final walkthrough.
Here’s what that means for you in concrete terms:
- A live person answers the phone, 24/7. At 2:00 p.m. on a Tuesday or 2:00 a.m. on a Sunday, a real human at (213) 810-3461 picks up. No voicemail box, no chatbot, no “leave a message and we’ll get back to you.”
- Written pricing before the work starts. You get the full price in writing at the quote stage. That price does not change at the door, and no new line items appear on a later invoice.
- Background-checked, uniformed technicians. You know exactly who is walking through your door, and they show up in the committed arrival window we gave you.
- A clean job site. When we’re done, the old window, the packaging, the metal shavings, and the dust are gone with us. We leave the place cleaner than we found it.
- The 365-Day Done Right Promise, in writing. If the work is not right within the guarantee period, we come back and fix it at no charge. That’s not a favor. That’s a written guarantee we hand you at completion.
- A free second visit if the repair fails. If a repair we made fails within the guarantee window, the return trip is on us. No negotiating, no fine print.
For a straightforward job like a horizontal roller window replacement, the difference between us and the next quote is rarely the window itself. It’s whether the company shows up when it said it would, sticks to the price it quoted, and stands behind the work six months later. Those are the things we put in writing.
Horizontal Roller Windows vs. Other Window Styles
If you’re replacing an old roller window and wondering whether you should switch to a casement, a double-hung, or an awning window instead, here’s our honest take. A horizontal roller window slides side to side, so it works well for wide openings and never intrudes into the room or onto a walkway. A casement window cranks outward for tighter seals and better ventilation in many situations, but it’s a poor fit for an opening where a swinging sash would hit a walkway, a patio, or outdoor furniture. Single & Double Hung Windows open vertically and are common in traditional architecture, but they don’t handle wide, low openings the way a slider does.
In short: if the existing opening is wide and low, or the window sits over a kitchen counter or sink where reaching a crank is awkward, a horizontal roller window is usually still the right choice. If you’re on the fence, we’ll talk it through based on the actual opening in your home, then put the recommendation in a written quote.
Energy Efficiency and LA Climate
Los Angeles has a unique climate problem for windows: we get brutal heat in the summer, mild winters, and a lot of direct sun almost year-round. The wrong glass package turns a west-facing room into an oven by 3:00 p.m. in August, and a single-pane slider does almost nothing about it.
For horizontal roller windows in LA, we typically recommend:
- Low-e double-pane glass on any window that gets direct afternoon sun. The low-e coating reflects heat back out in summer and back in during the cooler months, and the double pane cuts conductive heat transfer through the glass itself.
- Insulated frames on vinyl units, which reduce heat transfer through the frame edges. Aluminum frames conduct heat, so in hot climates like the San Fernando Valley, a thermally-broken frame or a vinyl frame is worth the small premium.
- Proper weatherstripping and sealing around the track and frame, which is where drafts and dust intrusion happen on roller windows specifically. It’s the part of the job a lot of installers rush, and it’s the part you can’t see after the trim goes back up.
We’ll match the glass and frame package to the orientation and exposure of your home, not just the cheapest option that fits the opening.
The Kingswell Guarantee and the 365-Day Done Right Promise
Every horizontal roller window job we do in Los Angeles operates under the Kingswell Guarantee: a written price before any work starts, a committed arrival window, a clean job site, and a written guarantee on the completed work. Those four promises apply on every single project, no exceptions.
On top of that, the 365-Day Done Right Promise means if the work is not right within the guarantee period, Owen Satterfield and the Westlight team come back and fix it at no charge. If the repair fails, the second visit is free. You don’t have to ask, negotiate, or threaten a bad review. These terms are in writing, and they’re handed to you when the job is complete.
The reason we structure it this way is simple: a Window Installation Near Me in Los Angeles, CA that fails six months later is a failed job. The guarantee is the mechanism that makes sure we stand behind what we installed, not a marketing line we hide behind.
Key Takeaways for Horizontal Roller Windows in Los Angeles
- Typical replacement cost: $450 to $1,100 per window installed, with most standard units landing at $500 to $800. Impact-rated and custom sizes run higher.
- Best fit: Wide, low openings, windows over counters or sinks, and any spot where a swinging sash would be in the way.
- Brands we install: ViewLux, PGT, CGI, CWS, and four others, matched to your actual opening and exposure.
- Process: Call, measure, written quote, scheduled install, written guarantee. In that order, every time.
- Support: A live person answers at (213) 810-3461 around the clock, and the 365-Day Done Right Promise is in writing.
Ready to Replace Your Horizontal Roller Windows?
If you’re in Los Angeles and your roller windows are sticking, fogging, or letting the afternoon sun turn your living room into a sauna, the next step is simple. Call Westlight Windows Los Angeles at (213) 810-3461. A live person will answer, ask what’s going on, and schedule a time to measure and quote. You’ll get a written price before any work starts, a committed arrival window, and a guarantee in writing when we’re done. That’s the only way we’ve done it since 2009, and it’s how every horizontal roller window job should go.
Written by Owen Satterfield, Owner at Westlight Windows Los Angeles, serving Los Angeles.
Six Reasons Homeowners Choose Westlight Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.