New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Casement Windows in Los Angeles, CA
Casement windows hinge at the side and crank outward, giving you a full, unobstructed opening when you want maximum airflow, and an airtight seal when you don’t. In Los Angeles, where summer afternoons push past 90 degrees and the marine layer rolls in most mornings, they’re a practical choice for rooms that get stuffy fast. At Westlight Windows Los Angeles, we’ve installed casement windows across the city since 2009, carrying eight manufacturer lines so we can match the right frame and glass package to your specific house rather than forcing whatever we happen to stock. Most casement window replacements in Los Angeles run $650 to $1,300 per window installed, depending on size, frame material, and glass package. Call us at (213) 810-3461 for a written quote before any work begins.
This guide covers casement window installation as part of our Window Installation work. If you’re just starting your research, you may also want to see our full Window Installation in Los Angeles page.
Key Takeaways
- Casement windows crank open on side hinges, sealing tighter than sliding windows because the sash presses against the frame weatherstripping.
- Most casement window replacements in Los Angeles cost $650 to $1,300 per window installed, with impact-rated glass pushing toward the top of that range.
- Casements are ideal for hard-to-reach spots like over kitchen sinks because the crank mechanism lets you open them without leaning or reaching.
- Westlight puts a written price in your hand before any work starts, shows up in a committed arrival window, and backs every installation with the 365-Day Done Right Promise.
When You Need Casement Windows
Not every Los Angeles home needs casement windows. But when the conditions below describe a room in your house, a casement is often the smartest replacement choice. Here’s what we look for when a customer calls us about their options:
- You’re tired of fighting a sliding window that sticks. Older aluminum sliders in homes built in the 1960s and 70s, common in the San Fernando Valley and parts of the Westside, have tracks that gum up with dust and grit. A casement’s crank-and-hinge mechanism has far less track surface to fail.
- A window sits over a kitchen sink or behind a counter. Reaching over a counter to push a double-hung up is awkward. A casement’s crank handle mounts low on the frame, so you open it without reaching past your shoulder.
- You feel air moving around closed windows on windy days. When Santa Ana winds pick up, even a half-warped sash lets air through. Casements seal tighter than sliding or hung windows because the sash closes against the frame under positive pressure.
- You want to catch the afternoon sea breeze. In neighborhoods like Playa del Rey or Redondo Beach, a casement window angled outward can scoop passing air into the room better than a window that only exposes half its area.
- You need a window that locks in a specific position. The crank mechanism holds the sash wherever you stop turning, so you can leave it an inch open for ventilation without worrying about a gust slamming it shut.
- Your current window sashes have dropped or the seals have failed. Condensation between panes means the inert gas between the glass has escaped. That’s a finished window. Replacing it with a properly spec’d casement from a line like PGT or ViewLux solves the problem for good.
Our Casement Windows Process
We follow the same sequence on every casement installation, whether it’s a single window in a Hancock Park bungalow or a full run across the back of a Silver Lake hillside house. It’s the Kingswell Way, and it’s built around four fixed promises: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, and put the guarantee in writing.
- You call and talk to a person. Not a voicemail box, not a chatbot. Our lines are staffed 24 hours a day, 7 days a week. We’ll ask about the room, the window’s location, what’s failing, and schedule a visit at a time that works for you.
- We show up, measure, and assess. Owen Satterfield or one of our background-checked, uniformed technicians visits your home. We measure the rough opening, inspect framing and wall condition, identify any rot or movement, and discuss how you use the room. This is where we flag issues like dry rot in older LA stucco homes, which is common in neighborhoods like Atwater Village and Highland Park.
- You get a written price before any work starts. Every line item is spelled out: window model, frame material, glass package, hardware finish, labor, disposal. That number does not change at the door. We don’t revise quotes after the fact, and we don’t send surprise invoices. If something changes during the job, we talk to you about it first.
- Installation day. We arrive in the window we committed to, protect floors and furniture, remove the old window, install and seal the new casement, and insulate around the frame. We use low-expansion foam where appropriate and re-caulk exterior perimeters so water stays out, which matters when January rains hit.
- Cleanup and walkthrough. We haul off the old window, sweep, and walk you through operation: crank, lock, tilt-in cleaning function if your model has it. You sign off on the finished work.
- Your written guarantee arrives. Every job comes with a written guarantee covering workmanship, handed to you at completion. If anything we touched fails within the guarantee period, we come back and fix it at no charge.
Casement Windows Pricing in Los Angeles
We give every customer a written price before any work begins, so you’ll never get a revised invoice at the door. That said, here are honest ranges for what casement window replacement runs in Los Angeles so you know what to expect before you pick up the phone.
| Item | Typical Range (Installed) |
|---|---|
| Vinyl casement, single window | $650 – $950 |
| Fiberglass casement, single window | $850 – $1,150 |
| Aluminum-clad wood casement, single window | $1,000 – $1,300 |
| Impact-rated casement (PGT or CGI) | $1,100 – $1,500+ |
| Full-frame replacement (dry rot repair, new framing) | Adds $200 – $600 per window |
| Stucco patching and exterior trim repair | Adds $150 – $400 per window |
What Affects the Cost
- Frame material. Vinyl is the most budget-friendly and low-maintenance. Fiberglass resists expansion and contraction better, which matters on west-facing walls in the Valley where afternoon temps push frames hard. Aluminum-clad wood gives a painted finish outside with real wood inside, the higher-end look for historic homes in areas like Windsor Square or Larchmont.
- Glass package. Standard dual-pane with low-e glass (a thin coating that reflects heat back into the room in winter and out in summer) is included in most quotes. Upgrading to triple-pane or impact-rated glass from PGT or CGI adds cost but gives you real protection on hillsides where wind loads are higher.
- Size and configuration. A 24×36 casement costs less than a 48×48 twin casement. Corner casements, radius tops, and oversized openings are custom orders with longer lead times and higher price tags.
- Replacement type. A pocket replacement (new sash and frame insert into the existing opening) costs less than a full-frame replacement, where the entire old frame is stripped to the studs. Full-frame makes sense when there’s hidden rot or you want maximum glass area.
- Existing condition. Homes in older Los Angeles neighborhoods, particularly pre-1970 builds, often have unpermitted additions or framing that’s out of square. Correcting that adds labor.
Free estimates are standard. Call (213) 810-3461 and we’ll schedule a visit with a written quote, not a hand-wave range.
How Casement Glass Packages Work
We carry product from eight manufacturer lines, and for casements we commonly spec ViewLux, PGT, CGI, or CWS depending on where the window sits. ViewLux delivers solid value for standard residential replacements. PGT and CGI both offer impact-rated casements that meet Miami-Dade standards, which is overkill for most of LA but makes sense in fire-prone canyon areas where ember intrusion through a failed window is a real risk. CWS rounds out mid-range options with good thermal performance numbers for the price. We’ll show you the differences and let you decide; our job is to explain tradeoffs, not push a single brand.
Where Casement Windows Make the Most Sense in Los Angeles
Los Angeles is not one climate. The marine layer that keeps Santa Monica at 70 degrees in July never reaches Woodland Hills, which can sit at 105 on the same day. Here’s what we see in different parts of the city:
- Coastal neighborhoods (Venice, Marina del Rey, Playa Vista): Casements fitted with standard low-e glass handle mild temperatures year-round. Corrosion-resistant hardware matters more than thermal upgrades, because salt air eats cheap steel operators in a few seasons.
- The San Fernando Valley (Encino, Sherman Oaks, Northridge, Tarzana): Triple-digit summer days mean glass package is everything. A dual-pane casement with a low-e coating on the outer pane keeps cooling costs down. We also see more drywall cracking around window frames out here because the clay soil moves, which is why we inspect framing carefully before quoting.
- Foothill and canyon areas (La Cañada, Pasadena, Topanga, Malibu canyons): Wind and fire are the concerns. Impact-rated casements from PGT or CGI hold up to windborne debris, and the tight seal keeps embers out. If your existing windows are single-pane, replacing them with impact-rated casements is a meaningful safety upgrade.
- Older central LA neighborhoods (Koreatown, West Adams, Echo Park, Highland Park): Many of these homes still have their original 1920s – 1940s wood casements or later aluminum sliders. Full-frame replacement gives you a modern, energy-efficient window while preserving the look, especially with wood-interior casements from our aluminum-clad line.
Wherever you live, we measure, look at the wall construction, and recommend the right window for that specific opening. That’s the difference between a contractor who slaps in a Horizontal Roller Windows unit everywhere and one who matches product to place.
FAQs – Casement Windows
How much does it cost to replace a casement window in Los Angeles?
Most single casement window replacements in Los Angeles run $650 to $1,300 per window installed. Vinyl casements on the lower end, impact-rated PGT or CGI casements on the higher end, with full-frame replacement adding $200 to $600 per window. The only way to get an exact number is a site visit and written quote, which we provide free at (213) 810-3461.
Can you install casement windows the same day?
Yes, in many cases. If the rough opening is in good shape and we’re doing a straightforward pocket replacement, a single casement window can go in same day. Larger jobs, full-frame replacements, or custom-ordered sizes take longer. Call (213) 810-3461 and tell us what you’re working with, and we’ll give you a realistic timeline on the spot.
Are casement windows more expensive than sliding windows?
Generally, yes, by about 15 to 25 percent for the same size and glass package. The crank mechanism and multi-point locking hardware cost more to manufacture than a simple sliding track. In exchange, you get a tighter seal, better airflow when open, and easier operation in awkward spots like over a sink.
Do casement windows provide better security than sliding windows?
Yes. A properly installed casement’s crank mechanism and multi-point lock make it much harder to pry open from outside than a sliding window held by a single latch. Impact-rated casements from PGT or CGI add another layer: the laminated glass resists forced entry and flying debris. If security is a priority, mention it when you call and we’ll walk through the options.
What happens if my casement window seal fails after installation?
We come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s in writing. If the work we did fails within the guarantee period, Westlight returns and corrects it free, no negotiating required. You also get a free second visit if a repair doesn’t hold. It’s the Kingswell Guarantee, hand-delivered at job completion.
The Westlight Difference
Westlight Windows & Doors is an independently owned and operated Kingswell location, founded in 2009. Owen Satterfield runs the show, and the name isn’t an accident: west light is the late-afternoon sun that pours through a good window, bright, warm, and worth doing right. That’s the standard we work to.
We carry eight manufacturer lines, including PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. That breadth matters because a 1920s Spanish Revival in Los Feliz needs a different window than a 1990s tract house in Porter Ranch, and some openings call for Picture & Fixed Windows instead of operable styles. We don’t sell one brand to every customer. We show you what fits your house, your budget, and your exposure, then put it in writing.
Every job includes the Kingswell Guatee in full: a written price before any work starts, a committed arrival window, a clean job site, and a written guarantee on the completed work. If a repair fails within the guarantee period, we come back and correct it at no cost. And when you call, a real person answers, 24/7. Not a phone tree, not a chatbot. A person who can schedule a visit or dispatch a technician.
Homeowners in Los Angeles have been burned before: the no-show contractor, the price jump at the door, the seal that failed six months after install. We built Westlight to be the opposite of that, and we’ve been doing it since 2009.
Ready for a Written Price?
Call (213) 810-3461 for a free estimate on casement window replacement in Los Angeles. We’ll schedule a visit, measure your openings, inspect the framing, and hand you a written quote before any work begins. No pressure, no revised invoices, no surprises. Just straight answers about what your casement windows will cost and how we’ll install them.
Written by Owen Satterfield, Owner at Westlight Windows Los Angeles, serving Los Angeles.
Six Reasons Homeowners Choose Westlight Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.