VLX 80 Awning Window

VLX 80 Awning Window in Los Angeles, CA | Westlight Windows Los Angeles

The VLX 80 Awning Window is a top-hinged aluminum window that opens outward from the bottom, letting you run ventilation even when it’s raining. That single design choice makes it one of the most practical windows you can put in a Los Angeles home, where morning marine layer and occasional winter showers shouldn’t mean closing up the house. Westlight Windows Los Angeles is an authorized ViewLux installation partner, which means we sell, measure, and install this exact product line under factory-authorized protocols. If you’re researching the VLX 80 for a remodel, addition, or full window replacement in LA, call us at (213) 810-3461 and we’ll walk you through pricing, lead times, and what installation actually costs.

Call (213) 810-3461

Product Overview – VLX 80 Awning Window

The VLX 80 is built around a simple idea: a window should let air move through a room without letting water in. Because it hinges at the top and opens outward, the sash itself acts as a small roof over the opening. Rain hits the glass and runs off, while the open bottom edge pulls fresh air inside. That’s why you see awning windows specified so often in coastal Los Angeles neighborhoods like Playa del Rey, Marina del Rey, and San Pedro, where damp air and drizzle are part of daily life.

Architecturally, the VLX 80 fits where other window styles struggle. It works well above kitchen sinks, in bathrooms, along stairwells, and in modern designs that pair large fixed glass with smaller operable units for cross-ventilation. The aluminum frame carries a profile width of 1.97 inches and a wall thickness of 0.079 inches, which gives it a slim sightline without sacrificing structural rigidity. That thinner profile is part of why architects in Los Angeles specify aluminum over vinyl when the design calls for clean lines and maximum glass area.

ViewLux engineered the VLX 80 with a thermal break, which separates the interior and exterior aluminum to reduce heat transfer. In a Los Angeles summer, that’s the difference between a window frame that bakes in the sun and one that stays comfortable to the touch. The thermal break also reduces condensation risk on cool mornings, a real concern in hillside areas like Mount Washington and Baldwin Hills where temperature swings are more pronounced than at the coast.

Westlight Windows Los Angeles carries this product because it solves the problems our customers bring us: windows that fog, frames that leak, rooms that get stuffy, and energy bills that climb every August. If you’re comparing the VLX 80 against other aluminum awning windows in the LA market, give us a call at (213) 810-3461 and we’ll tell you honestly where it wins and where a different option might serve you better.

Technical Specifications

Here are the numbers that matter for the VLX 80, in plain terms rather than a manufacturer’s cut sheet:

• Frame material: Extruded aluminum with a thermal break separating interior and exterior profiles
• Wall thickness: 0.079 inches, providing structural stiffness without added visual bulk
• Profile width: 1.97 inches, a slim sightline that works with contemporary LA architecture
• Glass options: Clear, Frosted, Low-E, Tempered, Laminated (impact-rated laminated available for coastal and hillside wind zones)
• Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood
• Screen options: Fixed Screen or Retractable Screen, configurable per window opening
• Operation: Top-hinged awning with outward opening, manual crank or available hardware upgrades
• Performance compliance: NFRC-rated thermal performance, tested to AAMA 2400/2410 installation standards

These specs are what we quote from when you call Westlight Windows Los Angeles for a project consultation. We can confirm current availability of each finish and glass combination at (213) 810-3461.

Performance Features

Thermal Efficiency – The thermal break in the VLX 80 frame interrupts the path heat would normally travel through solid aluminum. This is the feature that earns the window its NFRC energy rating and keeps your air conditioning from working harder than it should during a Los Angeles heat wave. Homes in the Valley, from Sherman Oaks to Encino, see the biggest difference.

Acoustic Performance – Aluminum frames with proper glazing and compression seals reduce exterior noise transmission. For homes near the 101, the 405, or LAX flight paths, pairing the VLX 80 with laminated glass cuts down the constant hum. We’ve installed this exact combination in Westchester and Inglewood homes and the difference is noticeable on day one.

Airtightness & Weather Seal – The VLX 80 uses continuous compression gaskets around the sash perimeter to keep conditioned air in and dusty Santa Ana winds out. In Los Angeles, where the fall winds push fine dust into every gap, window seal quality is not a luxury. It’s the difference between a clean windowsill and a weekly battle with a dust rag.

Waterproofing – Every VLX 80 we install in Los Angeles gets a full perimeter seal using AAMA 812 low-expansion foam, applied across all joints. The top-hinged design keeps rain out during operation, and the perimeter seal keeps water out where the frame meets the wall. This matters in LA’s rainy-season downpours, which hit hard and fast after months of dry weather.

Wind Resistance – The VLX 80 is wind-load rated to meet local climate requirements. That’s not marketing language; it’s the standard we apply to every installation in Los Angeles, from exposed hillside lots in the Hollywood Hills to canyon-wind corridors in the San Fernando Valley. We verify ratings against your specific exposure before we order a single unit.

Security & Hardware – Awning windows are inherently harder to force open from outside than sliding windows, because the locking mechanism sits at the bottom of the sash and requires multi-point engagement. The VLX 80’s hardware is engineered for repeated use without sagging, and the laminated glass option adds impact resistance for security-conscious Los Angeles homeowners.

Color & Glass Options

The VLX 80 comes in six finish options that cover the full range of Los Angeles residential styles. Premium Black is our most-ordered finish for modern and mid-century homes; it reads crisp against stucco and pairs beautifully with black-framed glass used in contemporary LA architecture. Pure White is the classic choice for Spanish Revival and traditional homes in neighborhoods like Hancock Park and Larchmont. Anodized Silver offers a raw aluminum look that works with industrial lofts and minimalist designs. Bronze gives a warmer metallic tone that’s common on mid-century apartment buildings. Champagne is a lighter warm tone that suits transitional homes. Teak Wood provides a wood-look finish for homeowners who want the appearance of timber without the maintenance, a popular choice in Los Angeles neighborhoods with Craftsman-era homes like Highland Park and Eagle Rock.

On the glass side, here’s how we help Los Angeles homeowners choose. Clear maximizes natural light, and with almost 300 sunny days a year in LA, that’s a default starting point. Frosted solves privacy needs for bathrooms and street-facing windows without curtains. Low-E reflects infrared heat, reducing cooling costs in summer; it’s the most common upgrade we sell. Tempered is a safety glass that crumbles instead of shattering into sharp shards, and it’s required by code in many locations within 24 inches of a door or near the floor. Laminated adds impact resistance and noise reduction, and for homes in designated wildfire or high-wind zones in the hills above Los Angeles, we recommend laminated glass on every operable window.

Installation by Westlight Windows Los Angeles in Los Angeles

Here’s the thing about aluminum windows: the product is only as good as the installation. A VLX 80 installed incorrectly will leak, bind, or fail early, and the manufacturer warranty will not cover it. That’s why Westlight Windows Los Angeles installs every unit in-house, following AAMA 2400/2410 installation standards without exception. There are no subcontractor roulette games on your project.

Our installation process starts with a pre-install inspection of the rough opening. We check the framing for rot, squareness, and load path before we order anything. In older Los Angeles homes, from Jefferson Park to Atwater Village, we regularly find opening dimensions that don’t match the original plans, and catching that early saves money. We then set every VLX 80 level, plumb, and square, the three measurements that determine whether a window will operate smoothly for 20 years or start binding in year two.

The perimeter seal is non-negotiable. We use AAMA 812 low-expansion foam on every joint where the frame meets the structure, then tool the seal for a clean finish. After installation, we run a water test on each window before we call the job done. In Los Angeles, building codes require specific anchoring and flashing depending on whether your home has wood-frame, stucco, or masonry construction, and we handle that determination on a per-opening basis.

Cleanup and haul-off are part of every project. We remove old windows, sweep the work area, and leave your home cleaner than we found it. If you’re concerned about lead paint or asbestos in an older Los Angeles home, we’ll discuss testing and mitigation before we touch the openings. Call (213) 810-3461 to schedule a free on-site measurement and we’ll quote the installation with these standards written into the scope.

Frequently Asked Questions – VLX 80 Awning Window

What is the lead time for the VLX 80 Awning Window? Depending on the finish and glass combination you select, the VLX 80 typically takes 3 to 6 weeks from order to delivery at our Los Angeles warehouse. Standard colors like Premium Black and Pure White usually ship faster, while custom glass packages like laminated Low-E can add time. We confirm the current lead time before you sign anything, so you’ll never get a surprise delay mid-project. Call (213) 810-3461 and we’ll check today’s factory schedule for your configuration.

Does the VLX 80 qualify for energy tax credits? The VLX 80 with Low-E glass can qualify for federal energy tax credits if the specific configuration meets the current Energy Star Most Efficient criteria for the Southern California climate zone. Not every glass package qualifies, so we verify eligibility for your exact order before you commit. The credit rules change periodically, and we stay current on them so our Los Angeles customers don’t leave federal money on the table.

What warranty comes with the Awning Window? The VLX 80 carries a manufacturer-backed warranty from ViewLux covering the frame, hardware, and glass under normal residential use, with the specific term varying by component. The warranty only applies when installation is performed by an authorized partner using AAMA-compliant methods, which is exactly how Westlight Windows Los Angeles installs every window. We also stand behind our workmanship with a written installation warranty, so there are no finger-pointing games if anything goes wrong.

Can I customize the size? The VLX 80 is built to order in custom widths and heights within the manufacturer’s structural limits, so you’re not locked into stock sizes. We measure every opening in your Los Angeles home and order each window to fit, not the other way around. For unusually large openings, we can specify reinforced framing and laminated glass to maintain wind-load ratings. Bring us your dimensions and we’ll tell you what’s possible and what it costs.

How do I maintain aluminum frames? Wash the frames twice a year with mild soap and water, and wipe the gaskets and hinges clean of dust and grit. In coastal Los Angeles neighborhoods like Venice and Malibu, rinse frames more frequently to remove salt residue. The hardware needs no lubrication on the VLX 80’s standard configuration, and the finishes are powder-coated or anodized to resist fading under LA sun exposure. If a gasket ever wears out, Westlight Windows Los Angeles can replace it without pulling the window.

Get a Quote – VLX 80 Awning Window in Los Angeles

Know what your VLX 80 awning window project actually costs before you commit. Westlight Windows Los Angeles provides free on-site measurements and written line-item quotes for homeowners across Los Angeles, from the Westside to the Eastside and every neighborhood in between. No phone estimates, no vague ranges, no change orders. Call (213) 810-3461 today and let’s get your windows on the calendar.

Written by the team at Westlight Windows Los Angeles, authorized ViewLux installation partner serving Los Angeles, CA.