New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Los Angeles pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Fast, Reliable Window Replacement Across Los Angeles
Window replacement in Los Angeles typically runs $850 to $2,800 per window installed, with full-frame jobs on pre-1980 stucco homes landing at the higher end because the wall assembly usually needs seismic strapping once the old frame comes out. Most single-window insert replacements in Los Angeles fall between $850 and $1,600, and we give you the written price before any work starts, not after we open the wall. If you’re looking at fogged glass, rotted wood jambs, or a window that hasn’t opened in a decade, call us at (213) 810-3461 and we’ll walk you through what it actually takes here in Los Angeles.

We know Los Angeles neighborhoods the way a local should. The stucco bungalows in Eagle Rock, the hillside post-and-beam homes in Mount Washington, the Spanish-style ranches in Mar Vista – each comes with its own set of window problems and framing quirks. Our crews have been working these streets since Owen Satterfield founded Westlight in 2009, and we’ve learned exactly what to expect when we pull a window out of a 1962 Los Angeles wall.
Why Westlight Windows Los Angeles Is Los Angeles’s Preferred Window Replacement Company
Homeowners in Los Angeles call us because we write the price down before the first screw turns. Not a vague range scrawled on a napkin – a line-item quote for the window, the flashing, the seismic strapping, and the stucco repair. That’s the Kingswell Guarantee, and it’s the same piece of paper every Los Angeles customer gets. If the price moves after we open the wall, you approve the change in writing first. No door-step surprises, no revised invoices at the end.
Owen Satterfield built this company on the Kingswell Way: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. That last part has teeth. Our 365-Day Done Right Promise means if the work isn’t right within the guarantee period, we come back to Los Angeles and fix it at no charge. No negotiating, no fine print.
Our techs are background-checked and uniformed, so you know exactly who’s walking through your door in Los Angeles. And when you call (213) 810-3461, a live person answers – 24 hours a day, 7 days a week. Not a voicemail box, not a chatbot. Someone who can schedule a visit or answer a question about your fogged double-pane right then.
Window Glass Repair in Los Angeles
Window glass repair in Los Angeles covers replacing the sealed glass unit inside an existing frame – the fix for fogged double-panes, cracked glass, or a failed seal that’s letting moisture between the panes. In Los Angeles, we see this constantly on homes built before 1980, where the original insulated units have given out after forty-plus years of sun exposure. A typical glass-unit replacement in Los Angeles runs $250 to $550 per window, depending on glass size and whether we’re matching low-E or impact-rated glazing.
Cracked Panes and Failed Seals
A cracked pane on a Los Angeles window is more than cosmetic. Single-pane glass on older sliding doors can shatter under Santa Ana wind gusts because there’s no laminated interlayer holding the pieces together. If the pane is intact but fogged, the seal has failed and the insulating gas has leaked out – the window still works, but it’s not insulating anymore.
We replace the glass unit itself when the frame is still square and the jambs are solid. That’s the economical fix, and it’s often done same-day because we stock common glass sizes for Los Angeles homes.
What Glass Repair Won’t Fix
If the wood jamb behind the stucco has rotted, new glass alone won’t solve it. In Los Angeles hillside homes, wind-driven rain hits the window perimeter at an angle, and failed waterproofing quietly rots the post-and-beam framing behind the stucco. When we find that during a glass repair visit, we show you photos and give you a written price for the framing work before we go further.
Window Pane Replacement in Los Angeles
Window pane replacement in Los Angeles means replacing the glass itself, often because one pane has cracked or the old single-pane glass is doing nothing for your cooling bill. On older Los Angeles homes, we typically replace single panes with low-E insulated glass – that’s a thin metallic coating that reflects heat back out in summer and keeps it in during winter. Expect to pay $300 to $700 for a straightforward pane replacement in a standard Los Angeles window opening.
Single Pane to Low-E
A 1960s ranch in Los Angeles with original single-pane windows loses a surprising amount of conditioned air straight through the glass. Replacing those panes with low-E insulated units cuts the cooling load meaningfully – in the San Fernando Valley and inland neighborhoods where summer highs hit triple digits, that’s real money off the electric bill. We match the glass to the existing frame, so the window looks the same from the street.
Impact-Rated and Safety Glass
Los Angeles isn’t a hurricane zone, but Santa Ana winds regularly gust over 60 mph in the foothills and passes. We recommend impact-rated or laminated glass for any window facing an open canyon, and it’s standard on hillside homes in neighborhoods like Mount Washington where wind loads are real. A laminated pane won’t shatter into shards if it breaks – it holds together, which matters when the next gust comes through.

Trusted Brands We Service in Los Angeles
Westlight carries eight manufacturer lines, and we match the product to the job rather than forcing the job to fit one brand. For Los Angeles homes, that means PGT and CGI impact-rated windows where wind and seismic safety matter, CWS for architectural aluminum on modern remodels, and ES Windows when we need custom-fabricated sashes for non-standard openings like those 1950s steel casement frames in Mount Washington. Because we stock these brands locally in Los Angeles, we’re not waiting on a truck from out of state when your window opening is 3/8 inch off standard. Call (213) 810-3461 and we’ll help you pick the right glass for this house, on this street, in this city.
Common Window Replacement Problems We See in Los Angeles Homes
- Rusted-out wood jambs hidden behind stucco. On pre-1980 Los Angeles homes, the original wood window frame often looks fine from inside but crumbles when we remove the old unit. Water seeped behind the stucco years ago and the jamb is gone. That forces a reframe, not an insert.
- Failed waterproofing at the window perimeter. Hillside homes in Los Angeles catch wind-driven rain at a sharp angle, and the original builder-grade flashing gives out. By the time the homeowner notices a water stain on the interior wall, the post-and-beam framing behind the stucco has often started to rot.
- Single-pane sliding glass doors shattering in Santa Ana winds. Older Los Angeles homes still have original single-pane sliders with no laminated interlayer. A 70 mph gust through a canyon pass can shatter one into shards. We replace these with impact-rated or laminated glazing that holds together.
- Steel casement windows rusted shut. In hilly neighborhoods like Mount Washington, many original 1950s steel casement windows have rusted through at the hinges. The rough openings are almost never standard sizes, so replacement means custom fabrication – which we handle through ES Windows.
The Los Angeles Retrofit Reality: What Opening the Wall Actually Turns Up
Here’s what separates window replacement in Los Angeles from the same job in Pasadena, Glendale, or Manhattan Beach. In Los Angeles, most pre-1980 stucco homes have original wood-frame windows set into post-and-beam framing without seismic shear panels. When we pull a full-frame window out of one of these walls, the surrounding wall assembly triggers mandatory earthquake retrofitting requirements. The city of Los Angeles enforces shear-resistance standards that are far stricter than neighboring cities – the moment that old window frame comes out, the exposed wall section has to be brought up to current seismic code. That means structural strapping at the jambs, and often shear paneling added behind the stucco.
This is the single biggest reason a window replacement quote in Los Angeles moves after the wall is opened. It’s not a bait-and-switch contractor tactic. It’s the building code. Here’s how we handle it: we inspect first, we check the wall assembly and framing before we quote, and we write an allowance into the contract for seismic upgrades before any work starts. If the city inspector requires extra strapping or shear paneling beyond the allowance, you get a written change order with a specific price, and you approve it before we touch anything. That’s the Kingswell Guarantee in action – the price is written before the work, and any change is written before the change is made.
In Mount Washington, our crew replaced a set of 1950s steel casement windows that were rusted shut in a post-and-beam home. The rough openings were non-standard, so we custom-fabricated replacement sashes from ES Windows and added structural strapping at the jambs to meet Los Angeles seismic shear requirements. The homeowner kept the original steel look but gained operational sashes and a visible boost in framing integrity once the stucco was repaired. That’s the kind of job you only learn to do right by doing it for years in Los Angeles.
Pricing for Window Replacement in Los Angeles, CA
Here’s what you can expect to pay in Los Angeles, based on the jobs we quote every week: insert window replacement (new window into the existing frame) runs $850 to $1,600 per window. Full-frame replacement – where we pull the old frame, reframe or add seismic strapping, and install a new unit – runs $1,800 to $2,800 per window, and that includes the seismic work the Los Angeles code requires. Glass-only replacement runs $250 to $550 per pane. Sliding glass door replacement with impact-rated glazing runs $2,500 to $5,000 depending on width. These ranges are for standard-size windows on a typical Los Angeles home; a custom-sized steel casement in a hillside home will land higher because the sash is fabricated, not pulled from stock. Every quote we give in Los Angeles is a written line-item price before work starts. Call (213) 810-3461 for your free estimate.
We Also Serve Cities Near Los Angeles
Westlight Windows Los Angeles serves the full Los Angeles metro area, and our crews regularly work in Manhattan Beach, Playa del Rey, South Pasadena, and West Hollywood. The seismic, stucco, and wind-load conditions are similar across these neighborhoods, but each city has its own permit desk and inspection requirements. For a full look at what our Window Replacement team handles, check our service page. If you’re in one of these nearby cities, give us a call and we’ll tell you straight what the job involves.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Window Replacement in Los Angeles
No, you don’t need a permit for a simple insert replacement where the window opening stays exactly the same and you’re not touching the framing. But the moment a Los Angeles crew removes the full frame and exposes the wall assembly, the job changes: the city of Los Angeles requires seismic shear compliance on the exposed wall section, which means a permit and an inspection. We pull the permits and we pass the inspections. It’s part of the price we write before the job starts. Call (213) 810-3461 if you want to know whether your specific job needs one.
Because most pre-1980 stucco homes in Los Angeles have framed windows without seismic shear panels, and the building code requires retrofitting once the wall is opened. The quote moves because the inspector requires structural work that wasn’t visible before the stucco came off. We handle this by writing a seismic allowance into your original contract and getting your written approval on any change order before we do the work. The price moves because the code demands it, not because we changed our mind. Call (213) 810-3461 and ask us to walk you through the allowance line on your quote.
Yes. We custom-fabricate replacement sashes through ES Windows to match the original steel casement profile, and we add structural strapping at the jambs to meet Los Angeles seismic shear requirements. The rough openings on those 1950s steel casement homes are almost never standard, so the sash has to be built to the opening, not pulled from stock. You keep the original look, but the window actually opens and the wall gets stronger. Call (213) 810-3461 and we’ll come take a look.
Yes. Low-E glass has a thin metallic coating that reflects heat back out in summer, and for a Los Angeles home with original single-pane windows, the difference is measurable. In inland neighborhoods where summer temperatures run above 90 for weeks, replacing single panes with low-E insulated units cuts the cooling load by a meaningful margin. The window pays for itself in cooling savings faster in Los Angeles than in coastal cities like Manhattan Beach because inland temperatures run higher. For an exact figure on your house, call (213) 810-3461 and we’ll run the numbers.
You don’t need impact-rated windows everywhere in Los Angeles, but you do want them in wind-exposed spots. Santa Ana gusts regularly exceed 60 mph in the foothills and canyon passes, and a single-pane slider or window on a hillside home can shatter under that load. We recommend laminated glass or full impact-rated units for any opening facing open canyons in neighborhoods like Mount Washington, and it’s standard on post-and-beam hillside homes. Flat-lot stucco bungalows in central Los Angeles can usually get by with standard insulated low-E glass. Call (213) 810-3461 and we’ll tell you which spots on your house actually need the upgrade.
Get Your Written Estimate in Los Angeles
You’ve read this far because you want a window that works and a company that honors its word. That’s exactly what Westlight Windows Los Angeles delivers. We inspect first, we write the price before any work starts, and we put the guarantee in writing. Whether you’re in Mount Washington looking at rusted steel casements or in Mar Vista with fogged double-panes, the process is the same: call (213) 810-3461, book your free estimate, and get a line-item price before a single screw turns. That’s the Kingswell Way, and it’s how Owen Satterfield has run this company since 2009.
Written by Owen Satterfield, Owner at Westlight Windows Los Angeles, serving Los Angeles since 2009.
Six Reasons Homeowners Choose Westlight Windows Los Angeles
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.